Gredia Mold Resin Release Agent is non-toxic, environmentally friendly, water-based particle type release agent, widely used in resins, plastics, etc.

Gredia Mold Resin Release Agent is safe, non-toxic, colorless, odorless and long lasting.

It contains no volatile chemicals and non-greaseless is specially formulated not to damage molds.

Gredia Mold Resin Release Agent is containing resin particles provide an excellent glossy effect with slippery touch.

SHRINKAGE ：（2.8％〜3.2％）

GREDIA MOLD RESIN RELEASE AGENT INSTRUCTIONS:

• 1. Mold full immersion in the liquid, about 2 to 5 seconds.
• 2. Remove the mold and elimination surface of excess residual liquid.
     (Recommended high-pressure air gun)
• 3. Placed in the ventilation of about 10 to 15 minutes to complete the operation of natural drying process.
     (Use warm wind air blower may reduce the drying time)

The product should be kept in a cool, ventilated place, avoid direct sunlight.